Check out our new product BrightShelf.  An architectural light shelf for daylighting!

DECORATIVE ARCHITECTURAL SHEET METAL FABRICATION, ALUMINUM SUNSHADES, & LIGHT SHELVES

|Aluminum Sunshades| Light Shelves| Aluminum Composite Panel Fabrication |

|Sheet Metal Fabricator |Brake Metal Fabrication |Sheet Metal Shearing |

[ Home ]    [ Products ]   [ Fabrication ]   [ Contact Us ]    [ Site Map ]    [ Links ]

INSULATED METAL PANELS DENVER, COLORADO 

Insulated metal panels are a great way to finish an exterior wall.  Since the exterior skin, insulation, and interior skin are all provided with one panel, the result is a system that is very efficient, clean, and fast to install.  Insulated panels are used in both roofing and wall panel applications.  Typically an insulated metal panel uses a tongue and groove style seam with a concealed fastener clip.  Structurally robust enough to span large distances insulated panels are foam filled with a urethane modified isocyanurate to provide R value.  Although the cost is moderate for these panels, they more than make up for it in function, efficiency, and speed.

We recommend that a small amount of additional panel stock is ordered with primary project for future repair and remodel needs.  It is very expensive to have short runs made of these panels.

We only design, fabricate, and install insulated metal panels in Colorado.  We are not a manufacturer of insulated wall panels.  If your project is outside of our service area, we recommend finding a local installer.

INSULATED METAL WALL PANELS:

• 200 INVERTED RIB -   Exterior Wall Panel  
  • Panel Thickness:  2" , 2.5", 3", 4", 5", & 6"
  • R-Value (ASTM C236):  2" (R-16); 2.5" (R-20); 3" (R-25); 4" (R-33); 5" (R-41); 6" (R-49)
  • Panel Width - 42"
  • Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
  • Exterior Face: Moderate Corrugation
  • Interior Face: Light Corrugation

• 300 Azteco Embossed-     
  • Panel Thickness:  2" , 2.5", 3", 4", 5", & 6"
  • R-Value (ASTM C236):  2" (R-16); 2.5" (R-20); 3" (R-25); 4" (R-33); 5" (R-41); 6" (R-49)
  • Panel Width - 42"
  • Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
  • Exterior Face: Flat Embossed
  • Interior Face: Light Corrugation

  

300GS Granitstone®-   Provides look and feel of E.I.F.S. or textured concrete without the inconvenience of field-applied textures.

• Panel Thickness:  2" , 2.5", 3", 4", 5", & 6"
• R-Value (ASTM C236):  2" (R-16); 2.5" (R-20); 3" (R-25); 4" (R-33); 5" (R-41); 6" (R-49)
• Panel Width - 42"
• Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
• Exterior Face: Flat with applied acrylic aggregate stucco finish
• Interior Face: Light Corrugation

300 Minor Rib- Used for Partitions, Liners, & Ceilings

• Panel Thickness:  2" , 2.5", 3", 4", 5", & 6"
• R-Value (ASTM C236):  2" (R-16); 2.5" (R-20); 3" (R-25); 4" (R-33); 5" (R-41); 6" (R-49)
• Panel Width - 42"
• Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
• Exterior Face: Light Corrugation
• Interior Face: Light Corrugation

300R Striated- Subtle ribs

• Panel Thickness:  2" , 2.5", 3", 4", 5", & 6"
• R-Value (ASTM C236):  2" (R-16); 2.5" (R-20); 3" (R-25); 4" (R-33); 5" (R-41); 6" (R-49)
• Panel Width - 42"
• Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
• Exterior Face: Light Striation (Embossed or Smooth)
• Interior Face: Light Corrugation

400 V-Wave- Bold, aggressive undulating ribs.

• Panel Thickness:  2" , 3" (nominal)
• R-Value (ASTM C1363):  2" (R-18); 3" (R-27)
• Panel Width - 39.375"
• Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
• Exterior Face: Undulating Ribs (Embossed or Smooth)
• Interior Face: Shadow Line Ribs

INSULATED METAL ROOF PANELS:

• 900 HIGH RIB ROOF SYSTEM -   Overlapping rib style roof panel.
  • Panel Thickness:  1.5", 2" , 2.5", 3", 4", 5", & 6"
  • R-Value (ASTM C236):  1.5" (R-12); 2" (R-16); 2.5" (R-20); 3" (R-25); 4" (R-33); 5" (R-41); 6" (R-49)
  • Panel Width - 39.375" or 40"
  • Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
  • Exterior Face: 1 1/2" Major Ribs ; Light Corrugation Minor Ribs.
  • Interior Face: Shadow Line Ribs

• 1000 STANDING SEAM ROOF SYSTEM -   Mechanically seamed 2" Sidelap
  • Panel Thickness:  2" , 3", 4", & 5"
  • R-Value (ASTM C236):  2" (R-16); 3" (R-25); 4" (R-33); 5" (R-41)
  • Panel Width - 42"
  • Panel Length:  Min Factory 10'-0" (can be hand cut smaller) ; Maximum 48'-0"
  • Exterior Face: 2" Standing Seam , Light Corrugation
  • Interior Face: Light Corrugation

Representative Projects:

SkyWest Airplane Hangar - Colorado Springs, CO

  Flagship REI - Denver, CO

New Belgium Brewing Company- Fort Collins, CO

Amgen - Longmont, CO

[ Home ] [ Back ] [ Products ] [ Fabrication ] [ Brochures ] [ History ] [ Employment ] [ News ]

Please Read our Privacy & Legal Disclaimer.  Product Brand names and/or logos either mentioned or shown on these pages are property of their respective companies.  ©2003-2010 H&H Enterprises, Inc .All Rights Reserved